The parts simply glue and clamp together, for ease of access for painting I have not glued the neck piece yet. Firstly the base plate Floor and the two Face Plate sides, then I let these dry.
I drilled a hole for the Torso magnet and using the Rear Hatch magnet attached to the Torso Magnet, inserted it into place in the Torso and waited for the epoxy to dry overnight. This ensured a correct hold and position as well as polarity!
For the Cockpit roof, I inserted two tiny 2mm x 2mm magnets into the Head and Roof to enable access to the cockpit details once painted but to hold in place also.
As you can see, the hold is sufficient to keep the roof in place even when turned upside down. The crew will be painted separately and the Power Cables left off for ease of painting.
So, a simple update. I will post a photo of the Titan consstructed so far and a compilation of all the posts soon. Hopefully some people will find this step-by-step useful in tackling their builds. Cheers, Siph.